Aquaguard Prima 100 B Technical Review: Specs, Power & Packaging | Buy in Gurugram

 In-Depth Technical Review: Aquaguard Prima 100 B (Commercial RO+UV)

By ME SHOP EXPERT | Location: Gurugram, Delhi NCR



Welcome back to Me Shop India! Following our overview of the Aquaguard Prima 100 B, many of our facility managers and technical procurement heads in Noida, Gurugram, and Delhi asked for the hard numbers.

You need to know if it fits your wall, how much power it consumes, and exactly what kind of membrane technology it uses. We believe in total transparency. Whether you are fitting this in a tight pantry in Cyber Hub or a factory floor in Okhla, here are the granular technical details you won't find on a standard brochure.

🛠️ Detailed Technical Specifications

Below is the complete engineering datasheet for the Aquaguard Prima 100 B.

1. Dimensional & Weight Specifications

FeatureSpecificationNotes
Product Dimensions630 (H) x 650 (W) x 340 (D) mmWall-mounted orientation
Net Weight (Unit Only)33.0 kg - 35.0 kgHeavy-duty steel frame
Gross Weight (Packaged)Approx. 38.0 kgIncludes packaging & accessories
Packaging DimensionsApprox. 700 x 720 x 400 mmEnsure door width >400mm for moving
Body MaterialPowder Coated CRCA SteelCorrosion-resistant for Delhi humidity

2. Purification Technology Components

ComponentType / RatingFunction
Membrane TypeThin Film Composite (TFC) Spiral WoundResistant to bacterial growth
Membrane Pore Size0.0001 MicronRemoves dissolved salts & heavy metals
UV Lamp8 WattsGermicidal UV-C for virus deactivation
Filtration Stages7-Stage ProcessSediment, Activated Carbon, RO, UV, Post-Carbon
Pump TypeHigh-Pressure Booster PumpHeavy-duty diaphragm pump
TDS Reduction90% - 95%Effective for input TDS up to 2000 ppm

3. Electrical & Power Consumption

ParameterValue
Input Voltage170 V - 240 V AC, 50 Hz
Power Consumption230 Watts (Max)
Power Supply UnitSMPS (Switch Mode Power Supply)
Booster Pump Voltage48V DC
Solenoid Valves24V DC

📦 Packaging & Delivery: What’s in the Box?

When you order the Aquaguard Prima 100 B from Me Shop India, here is exactly what arrives at your doorstep:

  1. Main Unit: The Aquaguard Prima 100 B Machine (Sealed in heavy cardboard with thermocol protection).

  2. Mounting Kit: Heavy-duty wall bolts and metal brackets (Crucial due to the 35kg weight).

  3. Inlet/Outlet Pipes: Food-grade ¼" and ⅜" tubing for raw water connection and reject water drain.

  4. Power Cord: Standard 3-pin molded plug (6 Amp).1

  5. Accessories: Diverter valve for tap connection.

  6. User Manual & Warranty Card: Stamped by Me Shop (Authorized Dealer).

Logistics Note for Delhi NCR: Since this unit weighs nearly 40kg when packed, we recommend our specialized delivery service in Gurugram/Delhi to ensure safe handling. It is not recommended to carry this on a bike or standard courier without pallet/crate protection.


⚡ Power & Efficiency Analysis

Is it electricity hungry?

No. At 230 Watts, the Prima 100 B consumes roughly the same power as two old-school light bulbs.

  • Running Cost: If you run it for 2 hours to get 200 Liters of water, it consumes approx. 0.46 units (kWh) of electricity.

  • Cost per Day: At Delhi commercial electricity rates (~₹10/unit), purifying 200 Liters costs less than ₹5 per day in electricity.

Motor Reliability:

The unit uses a 48V DC Booster Pump. Unlike AC pumps, DC pumps are less prone to heating up during continuous operation, which is vital for commercial environments like canteens where the machine runs for hours at a stretch.


🔧 Installation Requirements (Site Prep)

Before our technician arrives at your location in Faridabad, Noida, or Ghaziabad, please ensure:

  1. Raw Water Point: ½ inch thread connection.

  2. Power Socket: A 6 Amp 3-pin socket within 1 meter of the unit.

  3. Drain Point: A drain pipe or sink nearby for the reject water (RO waste).

  4. Strong Wall: The wall must be concrete or solid brick (not gypsum/partition wall) to support the 35kg operating weight.


Frequently Asked Questions (Technical)

Q: Can I connect this to a normal 15 Amp power socket?

A: Yes, you can use a 6 Amp or 15 Amp socket. The machine draws less than 2 Amps, so a standard socket is perfectly safe.

Q: What is the TFC Membrane lifespan?

A: In Delhi NCR water conditions (TDS ~800-1500), the TFC membrane typically lasts 12 to 18 months with proper maintenance. The integrated "Auto-Flush" feature helps extend this life by preventing scaling.2

Q: Does it have a dry-run protection?

A: Yes, it has a Low Pressure Switch (LPS) which automatically cuts off the pump if the raw water supply stops, protecting the motor from burning out.


Ready to Upgrade your Commercial Water System?

Me Shop India provides end-to-end service: Site inspection, detailed quotation, installation, and AMC.

📍 Visit Us:

Plot No 120, Sector 9, Gurugram, Haryana, 122001.

📞 Call for Technical Consultation:

+91-9971136843 | +91-9999696843

📧 Email for Quotations:

Sales@meshopindia.com

🔗 Buy Online:

www.meshopindia.com

Comments

Popular posts from this blog

Honeywell Air Touch U1 vs. U2: The Ultimate Battle for Large Room Air Purification in Delhi NCR

Breathe Pure in Delhi NCR: Expert Review of the Eureka Forbes 270 Surround 360 Air Purifier

How to Pick an Air Purifier: Understanding CADR & Room Size | ME SHOP